Category: Line Interactive Pure Sine Wave / Model Name: Claire 2000
Model Number: CLAIRE 2000
     Download Brochure
Check Alarm Code
 Features
  - Line Interactive with Stabilizer Design
  - 100% Digitized Microprocessor Controlled
  - Pure Sine Wave Output
  - Automatic Voltage Reguration (+/-20%)
  - Two in one design: Tower & Rack 19" case
  - AC Start (Power On UPS w/o battery)
  - DC Start (Power On UPS w/o line input utility)
  - Short Circuit, Overload & Surge Protection
  - USB port as standard
  - Free of charge "WinPower" monitoring & controll S/W via LAN/WAN
  - SNMP adaptor with "UPSnodeManger" via SNMP protocal
  - MIB II standard for SNMP node management S/W
  - Hot Swappable Battery
  - Extended Backup Time
  - Dual Modular Redundant (Option)
  - CE Declaration of Conformity
 

Product Descriptions

This series is a compact and fully pure sinewave line interactive UPS, and it designs for critical application and environment, such as desktops, servers, workstations, and other networking equipments. This model is available in the output ratings of 750, 1000, 1500, 2000, and 3000VA. This series protects your sensitive electronic equipments against power problems including power sags, spike, brownouts, line noise, and blackouts. This series designs from two-in-one form factor; it can be placed either in Rack 2U or Tower. The UPS case for 750 ~ 2000VA is made of plastic as well as 3000VA is made of metal. This series is powered from the AC mains and supply AC outputs via receptacles on the rear panel.SmartPower "Your Smart Choice of UPS".
*คลิกดูเทคนิค Line interactive pure sine wave
TypeItemsSpecification
CapacityCapacity2000VA/1200W
InputVoltage Range220 +/- 20% VAC
 Frequency Range50 +/- 10% Hz
 PhaseSingle Phase with Ground
 Generator InputSupport
OutputVoltage Range220 +/- 10% VAC
 Voltage Range (Batt.Mode)220 +/- 5% RMS for entire battery voltage range
 Frequency Range50 +/- 0.1% Hz
 Output Wave formPure Sine Wave
 OutletNEMA x 6
 Redundancy (Option)Dual Modular Redundant (DMR)
Overload Rating Line Mode110% shutdown after 3 minute; 150% shutdown after 10 cycles.
BatteryBattery type12V/7A (Sealed Lead-Acid Maintenance Free with suspended electrolyte) or on requested
 Number of Battery4 pcs. or on requested
 Backup time (depends on computer load)15-30 minutes
 Battery hot swapYES
 Battery ProtectionBattery Overcharges/Battery deep discharge/Auto self test/Fan failure protection
 Recharge Time3 hrs to 90% after discharge
Transfer TimeTransfer Time2 ms.
IndicatorAC modeLine LED lighting
 Backup modeBattery LED flashing every 4 sec.
 PCB failsPower module of UPS fails: LED lighting
 Load Level4 segment LED bar
 Battery Level4 segment LED bar
 UPS faultFault LED lighting
 OverloadOverload LED lighting
 Low BatteryBattery LED flashing every second
 Bad BatteryBad Battery lighting
 Operating modeNormal LED, Generator LED and Wide Range LED
 Voltage range220 V.LED, 230 V.LED and 240 V.LED
Audible AlarmBattery ModeSounding every 4 seconds
 Low BatterySounding every second
 FaultContinuously Sounding
 OverloadSounding every second
 Bad BatterySounding every second
DimensionTower Case (WxHxD)mm217x86.5x413.5
 Battery Case (WxHxD) mm217x86.5x413.5
WeightTower Case (kgs)6.5
 Battery Case (kgs)12
EnvironmentOperation Environment0-40 C
 Relative Humidity0-95% (Non-Condensing)
 Noise Level<45dB @ 1 Meter
InterfaceSmart RS-232 / USBS/W supports Windows Family, Linux, Sun Solaris, IBM AIX, Compaq True64, SGI IRIX, FreeBSD, HP-UX and MAC
 External Slot (Option)External Type of SNMP
 Dry-ContactYES
 EPOYES
International Standard CELow Voltage Directive(Safety): EN62040-1-1, EMC Directive: EN50091-2, EN61000-3-2, EN61000-3-3, EN55022